When copying several files (by holding down the <Ctrl> key and clicking on the files) the automatic management actions are suppressed and will have to be restarted manually later on. The difference between this procedure and the procedure involving single files is the message that the automatic management actions for this procedure have been disabled.
Once you have confirmed this, the file dialog starts as before in order to define the first filename. The subsequent filenames are then automatically increased by 1. During the copying process, the reference names of the symbols on the existing diagram pages are compared with those which are being copied. If a reference name already exists, then the default value 0 is added to the reference name being copied.
Example
–K1 is changed to –K1/1
and
–1K1 is changed to –1K1/1
Then renumber again in order to correct the changed reference name again.
The following applies here also
All of the necessary generation functions are executed in order to obtain a functioning project.
Example
You have copied several pages with cables and are working with the Cable manager: you can manually adjust the reference names which are now added or re-issue them via the automatic numbering system. After this, the Cable manager can be re-activated. The cable database is updated with the Read diagram command.