The component box can be represented several times with an identical reference name. For this purpose, the determining symbol is defined by a master assignment (in the symbol parameters). If a master was issued several times for one reference, the first symbol recognized by its coordinate is used for cross reference generation.
If you generate a cross reference run with the Automatic funct. / Autocross reference / Component box function, all found cross references are listed under the reference name of the master.
If you want to have them positioned under the casing, set Cross-reference below in the parameter menu.
If, apart from the master element, there are, for example, six other component boxes with identical reference, this could look as follows: 3 (strings per column)
