Repeat

The 'Repeat' command is used to repeat the last drawing procedure. When the command is selected, the cursor jumps automatically to the starting point of the last drawn element. You will then be prompted to enter the starting point for the copy. This start point can be in any direction and distance from the original start point. Once the cursor is in the right position, fix the new start point with the left mouse button (or <Enter> key) and the procedure will be repeated producing a copy of the original.

By pressing the left mouse button (or <Enter> key) again, an additional element will be placed that is the same distance and direction from the second as the second was from the first.