Pin numbers
are normally entered when a component is created using the commands on
the 'Editor database' menu. However, after a component has been placed,
the pin numbers can be modified at any time using the 'Pin numbers'
command.
Pin numbers
are normally entered when a component is created using the commands on
the 'Editor database' menu. However, after a component has been placed,
the pin numbers can be modified at any time using the 'Pin numbers'
command.
To modify a pin number:
Select the command and then select a component with the left mouse button (or <Enter> key).
The cursor is automatically positioned at the first pin.
The input field, at the bottom of the screen, displays the existing component pin number.
Enter a new pin number or accept the old one by pressing the <Enter> key.
The cursor jumps automatically to the next pin.
After the last pin has been numbered the procedure terminates, or you can terminate at any time by pressing the right mouse button (or <ESC> key).
Hint
With this command it is very easy to number component pins manually. However, the position and direction of the pin numbers are determined by the pins. To modify the position and direction use the 'Modify- Pins' command.