Terminal/Cable numbers

Use this command if you want to modify the pin numbers of terminals or cables (not reference names) easily!

Select the first terminal or cable conductor, the input line is pre­set with the current number. You can enter the new number or accept the existing one by pressing the <Enter> key. The sequence of the highlighted pins corresponds to the se­quence of the parts in the drawing memory. If you have already used the automatic numbering function and the option 'Sorted' was activated, the parts are already in the correct sequence, cor­responding to the configuration. The process stops after the last terminal pin or cable conductor. You can also cancel the command with the Escape key or the right mouse button.

Hint

This command is an easy way to change the pin numbers of terminals and cable conductors manually. Position and direc­tion remain unchanged, if you want to change these attributes you must use the command 'Modify - Component - Pins'